Page 4
Overview: You should find inside the Elumen8 carton the following items: 1, 200W 3200K Blinder 2, Instruction manual, 3, Power Cable Technical Specifications: • DMX channels: 1/2 or 4 selectable • 2 x 100W LEDs • Dimming, master/slave and DMX modes •...
Page 5
Operation: 1, Dimming Mode To enter the dimming mode, press the “MODE” button to show “DIMMER” on the LCD display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the brightness from 00-99. Now press the “ENTER”...
Page 7
DMX-512: • DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions form the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a data “out”...
Page 8
Notice: • Be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behaviour.