Taillight; Fuse Replacement - Cushman Refresher FS2 Owner's Manual

Taillight

1. Roll the rubber bezel from around the edge of the taillight and remove the
lens.
2. Install the new bulb.
3. Replace the lens.

FUSE REPLACEMENT

The fuse block is under the driver seat.
NOTICE: Have the vehicle inspected by your dealer if fuses continue to blow after they have been replaced.
1. Lift the seat bottom to access the fuses.
2. Remove the old fuse and replace with a new fuse of the same type and size.
3. Fuses are available from a local Distributor, an authorized Branch or the Service Parts Department.
V M
EHICLE AINTENANCE
Roll rubber bezel
away from body.
Taillight
Brake Light
53