Refresher Nsf And Oasis; Refresher Unit Operation - Fs2; Lock-Down Mechanism; Module Removal And Installation - Fs2 - Cushman Refresher FS2 Owner's Manual

R U
EFRESHER NIT

REFRESHER NSF and OASIS

The emissions label for these models is under the seat. Lift the seat for access.
REFRESHER UNIT OPERATION – FS2

Lock-Down Mechanism

• Counter-top:
The passenger side counter-top is removable for module
replacement. Removing the counter-top allows the modules to
slide out after releasing the module clamps (see next section
for module clamp operation). To remove the counter-top, lift up
and remove from the hinge support.
• Module Clamps:
The modules are secured by module clamps that apply a
downward force on the modules. Release and raise the clamp
by loosening the nut. Raise the clamp high enough so the
module can be pulled up and out of placement. The clamp
must be released on BOTH sides of module.
Module Removal and Installation – FS2
Turn nut to the left to release clamp force
on both sides of modules.
The counter-top and all modules must be correctly installed before operating the unit.
Incorrectly installed components can dislodge when the vehicle moves and cause possi-
ble injury to bystanders.
NOTICE: Tools are not required for module removable and installation.
Passenger side counter-top must be removed and module clamps released prior to removal of any
module.
28
Lift up passenger
side countertop
and remove.
Module clamp lifts up