Cushman Refresher FS2 Owner's Manual page 31

NO TOOLS REQUIRED
Dimple Boss - located on the bottom
of each module for positioning.
• 6"Cup Module:
The 6" cup module is aligned by four dimple bosses
located on the bottom of the module. To remove these
modules, remove the passenger side counter-top and
loosen module clamps, (refer to lock-down mechanism).
Gently pull the module up and out using the door handle
and or top end of module.
NOTICE: Passenger side counter-top must be
removed and module clamp must be loos-
ened before attempting module removal.
Modules can be arranged in any combination
of the 6" cup, 12", 18" or 6" pull through modules
up to total of 24" wide.
R
EFRESHER
Module Clamp
6" Cup Module
12" - 18" Center Module
6" Pull Through Module
Wire cup racks
are designed to
hold cups only.
U
NIT
29