Handling And Maintenance - Panasonic FZ-Y1 series Operating Instructions Manual

Handling and Maintenance

Operation environment
●
Place the computer on a flat stable surface not subject to shock, vibration, and danger of
dropping. Do not place the computer upright or turn it over. If the computer is exposed to an
extremely strong impact, it may become damaged.
●
Operating environment
Temperature: Operation : 5 °C to 35 °C
Storage : -20 °C to 60 °C
Humidity: Operation : 30% to 80% RH (No condensation)
Storage : 30% to 90% RH (No condensation)
Even within the above temperature/humidity ranges, operation for a long time in extreme
environments, smoking nearby, or operation in places where oil is used or where there is a lot of
dust will result in the product deterioration and will shorten the product life.
●
Do not place the computer in the following areas, otherwise the computer may be damaged.
•
Near electronic equipment. Image distortion or noise may occur.
•
In extremely high or low temperature.
●
As the computer can become hot during operation, keep it away from items that are sensitive to
heat.
Handling cautions
This computer is designed to minimize shock to parts such as the LCD and the flash memory
drive, but no warranty is provided against any trouble caused by shock. Be extremely careful when
handling the computer.
●
When carrying the computer:
•
Turn off the computer.
•
Remove all external devices, cables, Smart Cards
Only for model with Smart Card Slot
*1
•
Do not drop or hit the computer against solid objects.
●
When you board an airplane, take the computer with you and never put it in your checked
luggage. When using the computer on airplane, follow the airline's instructions.
●
Use only fingers or the dedicated electronic touch pen (optional)
place any object on its surface and do not press down strongly with sharp-pointed or hard objects
that may leave marks (e.g., nails, pencils and ball point pens).
Only for model that supports electronic touch pen (optional).
*2
●
Avoid any harmful substances such as oil from getting into the touchscreen. The pointer may not
work correctly.
●
Be careful not to get injured by dropping or getting hit when carrying the computer.
■
When the battery indicator does not light on
The battery indicator may not light on even if the AC adaptor is correctly connected to the computer,
due to the following reasons.
●
The AC adaptor's protection function may be working. In this case, pull out the AC cord and wait
for more than 1 minute before reconnecting the AC cord.
and other protruding objects.
*1
to touch the screen. Do not
*2
11