Handling And Maintenance - Panasonic JT-B1 Series Operating Instructions Manual

Handling and Maintenance

Operation Environment
p z Place this computer on a flat stable surface.
If this computer is exposed to an extremely
strong impact, it may become damaged.
p z Temperature :
Operation : -10 °C to 50 °C {14 °F to 122 °F}
(IEC60068-2-1, 2)*1
Storage : -20 °C to 60 °C {4 °F to 140 °F}
Humidity :
Operation : 30 % to 80 % RH
(No condensation)
Storage : 30 % to 90 % RH
(No condensation)
Even within the above temperature/humidity
ranges, using for a long time in an extreme
e n v i r o n m e n t w i l l r e s u l t i n t h e p r o d u c t
deterioration and will shorten the product life.
If this computer is wet in temperatures of
0 °C or below, freeze damage may occur.
Make sure to dry off this computer in such
temperatures.
* Do not expose the skin to this product when
1
using the product in a hot or cold environment.
(Úpage 4)
p z Do not place this computer in the following
areas, otherwise the computer may be
damaged.
y Near electronic equipment. Image distortion
y
or noise may occur.
y In extremely high or low temperature.
y
p z As this computer can become hot during
operation, keep it away from items that are
sensitive to heat.
Handling Cautions
This computer is designed to minimize shock
to parts such as the LCD and the flash memory
drive, but no warranty is provided against any
trouble caused by shock. Be extremely careful
when handling this computer.
p z When carrying this computer :
y Turn off this computer.
y
y Remove all external devices, cables and
y
other protruding objects.
y Do not drop or hit this computer against solid
y
objects.
y Do not grip the display part.
y
26
p z When you board an airplane, take this
computer with you and never put it in your
checked luggage. When using this computer
on airplane, follow the airline's instructions.
p z Use only the included digitizer pen or finger
to touch the screen. Do not place any object
on its surface and do not press down strongly
with sharp-pointed or hard objects that may
leave marks (e.g., nails, pencils and ball point
pens).
p z Do not use the screen when dust or dirt
(e.g., oil) is on the screen. Otherwise foreign
particles on the screen/digitizer pen can
scratch the screen surface or obstruct the
digitizer pen operation.
p z Use the digitizer pen only for touching
the screen. Using it for any other purpose
may damage the digitizer pen and result in
scratches on the screen.
When Using Peripheral
Devices
Follow these instructions and the Reference
Manual to avoid any damage to the devices.
Carefully read the instruction manuals of
the peripheral devices.
p z Use the peripheral devices conforming to this
computer's specifications.
p z Connect to the connectors in the correct
direction.
p z If it is hard to insert, do not try forcibly but
check this computer's shape, direction,
alignment of pins, etc.
p z Remove the cables when you carry this
computer. Do not pull the cables forcibly.