Transport Keys; Vfader Cycle - Zaxcom Maxx User Manual

MAIN MENU

Transport Keys

There are two ways that the record, stop, and play keys can be set to control the way Maxx will go into
record, stop and playback.
Shifted Mode
If the transport key is set to shifted mode and you press the TC, Bus or Setup key, the menu associated with
those keys will open. When set to shifted mode to go into record, playback or stop, you would need shift
those keys. To shift press the MENU knob while simultaneously pressing the REC, PLAY or STOP key. While
in shifted mode it is still possible to directly go into record, play and stop with a single key press by pressing
and holding the transport key for 1.5 seconds.
Unshifted Mode
If the transport key is set to unshifted mode and you press the REC, PLAY or STOP keys Maxx will go into
record, playback or stop. In unshifted mode to display the TC, Bus or Setup menus, it is necessary to press
the MENU knob while pressing the TC, Bus or Setup key.

VFader Cycle

Virtual fader will allow you to mix Analog inputs 5, 6 and the AES inputs right from the ENG Home screen.
If you activate "VFADER CYCLE", you can adjust the mix for the AES inputs and return inputs right from the
ENG Home screen.
When using the virtual faders the MENU knob will become the hardware fader for those inputs.
VFADER CYCLE lets you choose which inputs (if any) you want to be able to mix in the ENG Home screen:
Inputs 5 and 6 are the analog return inputs.
Please note if you need to access the main menu from the ENG meter screen while the VFader mode is
active, you will need to press and hold the MENU knob for 1.5 seconds
Shows which inputs will be available
when the Virtual Fader is activated
30
Mode Menu