Audiovox Pursuit Pro 9276 Installation Manual page 3

To exit program mode, turn ignition off, or press and release valet switch.
RF Programmable Features Bank 3 Is Remote Start Selectable Features:
Feature Selection 1 Chirp
1st Defrost Output Pulsed
2nd RF Start Chirp Off
3rd Run Time 5 Mins
4th Parking Lights On Steady
5th Input Check Voltage
6th Voltage Level >0.5V B4 Start
7th Ign. 2 Select Off During Crank
8th Ign. 3 Select Off During Crank
9th Diagnostics Off
10th Crank Time 0.8 Sec
11th Gas/Diesel Gas
12th Transponder O/P While R/S On
13th Temp Start Not Available
14th Crank Averaging Averaging
Note: When averaging, the engine must be started 4 times with the key to be effective.
15th R/S Shock Not Available
16th Turbo Select Off
17th Black/Blue (Aux O/P) Single Pulse
When using the RF programmer, enter the program mode as follows:
Turn the ignition on.
Press and release valet switch 3 times;
turn ignition off then on.
Press and hold valet switch for 5 seconds.
Siren chirps 2 times indicating access to RF feature program mode.
To exit program mode, turn ignition off, or press and release valet switch.
2 Chirps 3 Chirps 4 Chirps
10 Mins
On On & Car Finder
10 Mins 15 Mins 20 Mins
Flashing
Tach DBI Tach
< 0.5V B4 Start
On During Crank Same As Accy.
On During Crank Same As Accy Same As Starter
On
1.0 Sec 1.5 Sec 2.0 Sec
Diesel 10 Diesel 15 Diesel 20
During Start Until Ign. Off
Preset Time
3 Mins 5 Mins 10 Mins
As Feat #1 Bank 2
5 Chirps 6 Chirps