Initial Setup (Ready To Play); Tv/Vcr - Panasonic Omnivision VHS PV-DF273 Operating Instructions Manual

Initial Setup
Please make all cable or antenna connections before powering on.

Initial Setup (Ready to Play)

Press TV/VCR on the remote for TV-VCR mode.
Plug the unit power cord into an AC wall outlet.
1
Press POWER* on the remote or unit. The unit
2
comes on and auto channel and clock set
starts.
• If you use a cable box, turn it on and set it to the Public
Broadcasting Service (PBS) channel in your time zone. If you
use a DSS receiver, it must be turned off.
Settings are made automatically. When setup
3
is done, this screen appears.
If AUTO CLOCK SET IS INCOMPLETE screen appears,
set the clock using MANUAL CLOCK SET procedure on
next page.
14 14
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
CH AUTO SET PROCEEDING
AUTO CLOCK SET
PROCEEDING
CANCEL : PRESS STOP KEY
2 / 6 / 2003 THU 12 : 00PM
DST : ON
SETT I NG : CH 1 0
AUTO CLOCK SET
COMPLETED
AUTO CLOCK SET
I S I NCOMPLETE
PLEASE SET CLOCK BY
PRESS I NG ACT I ON KEY
(Ready to Play)

TV/VCR

POWER
EJECT
ACTION
SELECT
SET
STOP
Notes
• Function buttons are inoperative during
Initial Setup.
• To remove a cassette during Auto Set,
press EJECT twice on the remote or
STOP twice on the unit. In this case,
settings must be made manually. (See
pages 16-17.)
• Depending on conditions, Auto Clock
Set may take longer than 30 minutes.
In this case, press STOP to stop setup
and perform settings manually. (See
pages 16-17.)