Dvd Volume Adjust - Panasonic Omnivision VHS PV-DF273 Operating Instructions Manual

* Important: If a remote control button does not work when pressed, press the TV/VCR button on the
remote and try the button again.

DVD Volume Adjust

Some DVDs are recorded in lower average volume
levels. For these DVDs, this unit can be set so that
the average volume is increased automatically.
Press ACTION* to display MAIN MENU.
1
2
M A I N MENU
DVD LOCK LANGUAGE
TV CLOCK
SELECT : SET : SET
END : ACT I ON
3
SET UP TV
CAPT I ON
I NPUT SELECT : TUNER
SET UP V I DEO / AUD I O
DVD VOL ADJUST : + 2
SELECT : SET : SET
END : ACT I ON
Press ACTION twice to return to the
4
normal screen.
Surround Sound System
You can hear a deeper, 3-D sound effect using
just the unit's two front speakers.
SURROUND ON
SURROUND OFF
Notes
• Surround sound effect is not available for normal
(mono) broadcasts.
• The surround effect (TV, VCR mode only) is not
output to Audio Output L/R Connector.
1) Press
to select "TV."
2) Press SET to
display SET UP
1
3
5
TV screen.
CH
1) Press
select DVD
VOL ADJUST.
2) Press SET to
set the level (0,
+1, or +2).
Press SURROUND.
• "SURROUND ON" is
displayed.
To Cancel,
press SURROUND.
V.S.S. (Virtual Surround Sound)
[DVD only]
Enjoy a surround-like effect if you are using two
front speakers only. The effect is broadened
and sound seems to come from virtual speakers
on either side if the disc has surround signals
recorded on it.
Press VSS in DVD mode.
• The Surround sound effects can be changed by
pressing VSS repeatedly as shown by the fi gure
below.
VSS OFF
to
VSS1
VSS2
VSS3
Notes
• V.S.S. effects is available in DVD mode only.
• Turn off the surround effects on the other equipment.
• V.S.S. will not work, or will have less effect, with some
discs.
• Turn V.S.S. off if it causes distortion.
Default
41 41