Blocking Message - Panasonic Omnivision VHS PV-DF273 Operating Instructions Manual

* Important: If a remote control button does not work when pressed, press the TV/VCR button on the
remote and try the button again.
DISPLAY
ACTION
SELECT
SET
Process of V-Chip Control Feature
Enter Code Setup

Blocking Message

<When V-Chip Control is activated>
CH08
PROGRAM RAT I NG EXCEEDED
RAT I NG : PG-1 3
ACCESS CODE ----
ENTER : 0-9
To View a Blocked Program/Movie
[Temporarily Deactivate V-Chip Control]
Enter your secret code (ACCESS CODE) in the
Blocking Message screen.
• V-Chip Control is reactivated when power is turned off
or power failure occurs.
[Deactivate V-Chip Control]
Enter your secret code (steps 1-3 page 36). Then,
set US MOVIES and/or US TV PROGRAMS to
"OFF" using and SET. (Ratings set on pages
37 and 38 is retained and will be in effect when
V-Chip Control is activated again.)
Blocking
• If a program or movie
exceeds the ratings you
have set, a message
will appear on a black
background and sound is
muted.
39 39