Commercial Skip; Auto Operation Functions - Panasonic Omnivision VHS PV-DF273 Operating Instructions Manual

* Important: If a remote control button does not work when pressed, press the TV/VCR button on the
remote and try the button again.

Auto Operation Functions

■ Auto Shut Off
No broadcast signal in TV mode (Only when Weak Signal
Display is set to OFF.), DVD stops, or blank tape is played
for 5 minutes.
➞ Power turns off
• This feature is canceled if any button is pressed during above
conditions.
■ Auto Playback
Insert a tape in Power off mode
➞ Power turns on
• Playback begins if tape has no record tab.
■ Auto Rewind (except for Recording)
Tape reaches its end
➞ Rewind, ➞ Stop
■ Playback Auto Eject (Repeat Play is "OFF")
Tape with no record tab reaches its end
➞ Rewind, ➞ Stop, ➞ Eject

Commercial Skip

By pressing the CM/ZERO button in Playback mode you
can skip over 1 to 3 minutes of recorded tape in just a few
seconds.
Press CM/ZERO repeatedly to select skip time in
Playback mode.
• No indication appears.
OFF
1st Press
2nd Press
3rd Press
1 min skip
2 min skip
3 min skip
33 33