D-Link dcs-910 User Manual page 26

Section 3 - Configuration
If you have a Dynamic DNS account and would like the camera to update your
IP address automatically, enable DDNS and enter your host information.
Click Next to proceed.
Click Next
Enter a name for your camera.
Then, click Next to proceed.
Click Next
Configure the correct time to ensure that all events triggered, captured and
scheduled at the right time.
Then, click Next to proceed.
Click Next
This page displays your configured settings. Click Apply to save and activate
the setting, or Back to change your settings.
Click Apply
D-Link DCS-910 User Manual 26