D-Link dcs-910 User Manual page 20

Section 3 - Configuration
Enter the admin ID and password.
Note: The default Admin ID is admin with the password left blank.
Click Next
Select DHCP if you want to obtain a new IP address every time the camera boots up, or
select static IP to use the same IP address at each boot up. If you choose Static IP it will
be necessary to enter an IP Address and Subnet Mask suitable for your local network.
Enter a Default Gateway IP address to access the camera from remote locations or oterh
subnets. Enter DNS IP addresses if needed for remote access accross the Internet.
Click Next
D-Link DCS-910 User Manual 20