D-Link dcs-910 User Manual page 10

Section 1 - Product Overview
Attach the External Power Supply
Attach the external power supply to the DC power input connector located on the bottom panel
of the DCS-910 and connect it to your local power supply.
Note: Power source is confirmed when the red LED Power Indicator located below the
lens on the DCS-910 is illuminated.
The Internet Camera comes with a camera stand with a swivel ball screw head that can be attached to the Internet Camera back panel
socket cavity. Attach the camera stand to the Internet Camera and station it for your application. There are holes located in the base
of the camera stand allowing the Internet Camera to be mounted to the ceiling, or any wall securely.
Socket for camera stand
D-Link DCS-910 User Manual 10