Table of Contents
Advertisement
4.2
Other
Stocking temperature
Working temperature
Humidity
5.0
Testing
In case of proper installation the RUN diode is alight. If 9bit data format is selected the
9 bits indicator must be alight. The TxD and RxD indicators must blink during
transmission.
6.0
Troubleshooting
Symptom
ELO 171 does not work
after installation
Connection in normal
operation quit working
7.0
Ordering Information
Supply code is ELO E171.
Action
Check if the RUN is alight.
Check the power supply.
Check the RS-485 link connection.
Check the power supply
Check if the cables are OK..
Turn off and on the power supply
and detect if the converter starts again.
6
-10° to +55°C
+0° to +50°C
0 – 85% (non-condensing)
ELOE171ZKE001
Advertisement
Table of Contents
