Table of Contents
Advertisement
from the DC supply 6 to 24 V mustn't exceed 100 mA. The converter is protected
against the reversing of polarity.
4.0
Specifications
4.1
Electrical parameters
Interface
Transmitted signals
Control RS-232 signals
RS-232 connector
RS-485 connector
Transmission mode
Power supply
Minimum/max supply voltage
Connector
Isolation between interfaces
Permissible over-voltage on the
line under ČSN 33 0420:
Required link impedance
4.2
Other
Range
Maximum transmission rate
Minimum data rate AUT/ RTS
Dim.: width x length x height
Weight
Stocking temperature
Working temperature
Humidity
RS-232 / RS-485
TxD and RxD
local jumpers RTS-CTS
DTR- DSR-DCD
DB9F, DCE
DB9M
half-duplex, RTS or /RTS controlled, or
automatically by time constant 0.1 to 2.5 ms
external DC supply 6-24V / 100mA
6 / 24 V
EIAJ 2.35mm and RS-485 connector
without galvanic isolation
the line must not be exposed to the
atmospheric discharge influences
100Ω
1200m, double-wire link
115 200 bps
4 800 / 50 bps
34 x 63 x 19 mm
25 g
o
o
- 10
to +55
C
o
o
+ 0
to +50
C
0 – 85% (non-condensing)
6
ELOE06GZKE001
Advertisement
Table of Contents
