Hitachi 50VG825 Operating Manual page 76

SALE on Projector Bulbs at www.BulbAmerica.com
Setup
INPUT 4 Auto Link
Use this function to automatically turn the TV on and
tune to Input 4 when it detects a video signal to
Input 4.
1. Use the CURSOR PAD
AUTO LINK setting of your choice.
2. When AUTO is selected, the TV will turn on and
tune to INPUT 4 automatically, when the INPUT 4
input device is turned on. This is convenient when
you want to watch a movie with your VCR,
laserdisc player or DVD player.
3. When REMOTE is selected, the TV will turn on and switch to Input 4 automatically when the Input 4 input
device is turned on and the VCR, laserdisc, or DVD play button on your remote control is pressed. This is
convenient when you want to record a movie with your VCR and watch it later.
4. Select OFF to disable this function.
5. Press EXIT to quit menu or select AUTO LINK to return to previous menu.
NOTE: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK
is used again. To do this, turn your VCR, laserdisc or DVD player OFF. This feature is now reset and
will turn on your TV as described above.
2. When using REMOTE mode, any remote control button will substitute for your video input device
play button. However, intended operation is for use with your VCR, laserdisc, or DVD play button.
3. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will
automatically turn off after three hours.
Set AV Net
Use this feature to control your external Audio/Video equipment using your HITACHI LCD Rear PTV Remote
Control. The IR Mouse cable must be properly connected for the AV NET feature to work.
1. Press the MENU button.
2. Use the CURSOR PAD
highlight SETUP.
3. Press the SELECT button to select.
4. Use the CURSOR PAD
highlight SET AV NET feature.
5. Press the SELECT button to select.
76
take additional 5% Off with coupon code 5PDF
or to highlight the
or CHANNEL WHEEL to
or CHANNEL WHEEL to
Setup
Set The Inputs
Input1 :
****
Input2 :
****
Input3 :
****
Input4 :
****
Auto Link : Off
Input5 :
****
Move Return
SEL
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Move Select
SEL
Setup
Menu Preference
Lamp Power Control
or
Set The Inputs
Set AV NET
Set Closed Captions
Set Monitor Out
Upgrades
Quick Start Up
Move Set
SEL