Hitachi 50VG825 Operating Manual page 12

SALE on Projector Bulbs at www.BulbAmerica.com
Rear Panel Connections
¾ TV AS CENTER (INPUTS 1-4)
These jacks are for stereo amplifiers with center
signal output capability. This feature allows the TV
speakers to be used as a center speaker. The TV
must be set as a center channel by selecting TV
AS CENTER on the Internal Speakers Settings of
the Audio Menu (see page 45).
µ IR Blaster/G-LINK
This jack provides IR output to your external
components (VCR, Cable box, DVD player, etc.).
With this connection, your external components
can automatically be controlled by the A/V network
feature. This connection will allow you to control
the external components with your LCD Television's
remote control in TV mode. The G-LINK
connection will enable the TV Guide On Screen
recording feature.
¸ CableCARD Slot
This slot is for the CableCARD that will be provided
by your local cable operator to gain access to
chosen cable channels. The CableCARD will allow
you to tune digital and high definition cable
channels. Please call your local cable operator if
this service is available before requesting a
CableCARD (also known as Point of Deployment
(POD) module).
IMPORTANT: Please read the "Lamp Power
Control" feature on page 75 before installing the
CableCARD.
1. Connect a coaxial cable to cable terminal of the
Rear Panel Jacks.
2. Insert the CableCARD into the slot (Top of card
should be facing right as shown below).
Digital Cable
Apparatus Claims of U.S.
Patent Nos. 4,631,603;
4,577,216; 4,819,098;
CABLE 4,907,093; and 6,381,747
licensed for limited
viewing uses only.
AIR
Y/ Y/
VIDEO VIDEO
MONITOR OUT
S
I
P P P P
V
B B
I
D
E
O
P P P P
R R
V
I
D
E
(MONO) (MONO) (MONO) (MONO)
O
A
U
D TV AS CENTER
I
O
AUDIO
TO HI-FI INPUT 1 INPUT 2 INPUT 3 INPUT 4
NOTE: 1. A digital cable subscription is required.
2. Do not insert a PCMCIA card into the
CableCARD slot.
12
take additional 5% Off with coupon code 5PDF
TM
CableCARD™
(Top of card faces right)
Top faces
Upgrade Card
HDMI INPUT 1
HDMI INPUT 2
B B
OPTICAL OUT
Digital Audio
R R
/ G-LINK
L
CAUTION
R
If the CableCARD is properly installed or not installed,
the TV will display the following respective screens.
CableCARD is installed
OR
CableCARD is not installed
After the CableCARD is installed, wait until the second
screen below appears. The third screen below will
appear if a channel is not authorized for viewing. Press
the EXIT button to exit the second screen.
Acquiring Data.
Please wait.
In order to start cable service
for this device, please contact
your cable provider
CableCARD(tm): 123-456-789-1
Host: 123-456-789-1
Data: 123-456-789-1
Unit Address: 123-456-789-1
Press EXIT to return
OR
Not an Authorized Channel
Please take note of all information on the screen (you
will provide this information to your cable operator).
Call your cable operator and give them the information
from the card to start your cable service.
NOTE: Please see Appendix E on page 100 for
additional CableCARD information.