Hitachi 50VG825 Operating Manual page 22

SALE on Projector Bulbs at www.BulbAmerica.com
How to Use the Remote to Control Your TV
22
take additional 5% Off with coupon code 5PDF
/
POWER button
Press this button to turn the TV set on or off when
the remote is in TV mode. (See page 21 for
instructions on how to set the remote control to TV
mode.)
MODE Indicator
Turns on or blinks to show remote control mode.
SOURCE ACCESS ( or ) buttons
Press these buttons to select remote control mode.
SOURCE ACCESS (ENT) button
Hold down this button while entering your device
code to program the remote (see pages 31-38).
You can also use this button in an optional Input
access feature (see page 36).
PAUSE button
Press the PAUSE button to freeze the picture.
Press the EXIT button to return the picture to
motion. Press the PAUSE button repeatedly to
cycle through the three different freeze modes (see
page 30).
Freeze
Freeze
Freeze
Freeze
Freeze