Hitachi 50VG825 Operating Manual page 81

Setup
16. Use the CURSOR PAD
A/V Receiver Source if you have connected the
Monitor Out and Optical Out to the A/V
Receiver. Select "Not Connected" if not used.
17. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next step.
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Other
IR Code Set Other
TV Input Not Connected
Monitor out Settings
If you connect the Monitor out or Optical out
to an A/V Receiver, please selcet
an A/V Receiver Source.
Monitor Out Not Connected
Optical Out Not Connected
Move Change Input
18. If you would like to label your A/V Receiver
Source, use the CURSOR PAD
highlight "Yes", then press the SELECT button
to continue. Selecting "No" will bypass the
Source Labeling.
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Other
IR Code Set Other
TV Input Not Connected
Monitor Out Not Connected
Optical Out Not Connected
Would you like to relabel the Source buttons?
Back
Move Select
SEL
19. Use the CURSOR PAD
A/V Receiver Sources.
20. Use the CURSOR PAD
A/V Receiver Sources.
21. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Source Settings
Source Name
Source 1 Satellite
Source 2 ----------
Source 3 ----------
Source 4 ----------
Source 5 ----------
Source 6 ----------
Source 7 ----------
Source 8 ----------
Source 9 ----------
Source 10 ----------
Move Change Name
22. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Other
IR Code Set Other
TV Input Not Connected
Monitor Out Not Connected
Optical Out Not Connected
All settings are complete!
Move SEL Select
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
23. Select "YES" to setup another device or select
or to select the
, , and to
Learning Mode (Example: CUSTOM/DVD 3
Back Next
SEL Select
1.
or to
2.
3.
No Yes
4.
or to select your
or to label your
, , and to
5.
Back Next
6.
Select
SEL
Back Next
"No, thanks, I'm done" to exit the AV Net
setup.
AV Net Setup Wizard : A/V Receiver Setup
Congratulations!
Your A/V Receiver is now
connected to your AV network.
Would you like to setup another device?
No thanks, I'm done. Yes
Move SEL Select
Setup)
Press the SELECT button to start the SETUP
WIZARD.
AV Net Setup Wizard
Welcome to the AV Net Setup Wizard.
Before starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
Back
Move SEL Return
Use the CURSOR PAD or
Press the SELECT button to select "NO".
(Select NO to setup other devices).
Use the CURSOR PAD , ,
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Do you want to use an A/V Receiver.
Yes
No
Back
Move SEL Select
CURSOR PAD , , and
"Custom", then press the SELECT button to
select.
Select NEXT to continue.
AV Net Setup Wizard : Device Settings
Device Settings
Please select a device.
DVD DVD2
Cable Satellite
DVD Recorder PV Recorder
VCR VCR2
Custom
✓
Device is set.
Back
Move SEL Select
Start
to highlight NO.
and to
Next
to highlight
Next
81