The Remote Control - Hitachi 50VG825 Operating Manual

Hide thumbs Also See for 50VG825:
Table of Contents

Advertisement

The Remote Control

In addition to controlling all the functions on your
HITACHI LCD Rear Projection TV, the new remote
control is designed to operate different types of
VCRs, CATV (Cable TV) converters, set-top-box,
satellite receiver, DVD players, and other
audio/video equipment with one touch. Basic
operation keys are grouped together in one area.
To operate your LCD Rear Projection TV, point the
remote control at the remote sensor of the
television and select the TV by pressing the
button of the Source Access on the remote. The
TV mode indicator will blink, indicating that the
remote will now control your television.
To operate your VCR, point the remote at the
remote sensor of the VCR and select PVR by
pressing the
or
button of the Source Access
on the remote. The PVR mode indicator will blink,
indicating that the remote will now control your
VCR (see page 34 for instructions on how to
program the remote to control your VCR).
To operate your PVR (Personal Video Recorder),
point the remote at the remote sensor of the PVR
and select PVR by pressing the
the Source Access on the remote. The PVR mode
indicator will blink, indicating that the remote will
now control your PVR (see page 34 for instruction
on how to program the remote to control your
PVR).
To operate your cable box, point the remote at the
remote sensor of the cable box and select the
CABLE (CBL) by pressing the
Source Access on the remote. The CBL mode
indicator will blink, indicating that the remote will
now control your cable box (see page 31 for
instructions on how to program the remote to
control your cable box).
To operate your set-top-box or satellite receiver
point the remote at the remote sensor of the set-
top-box and select the SET-TOP-BOX (STB) by
pressing the
or
button of the Source Access
on the remote. If you have a satellite receiver, use
this button to program your satellite receiver. The
STB mode indicator will blink, indicating that the
remote will now control your set-top-box (see
page 32 for instructions on how to program the
remote to control your set-top-box).
To operate your DVD player, point the remote at
the remote sensor of the DVD player and select
DVD by pressing the
or
Access on the remote. The DVD mode indicator
will blink, indicating that the remote will now
control your DVD Player (see page 33 for
instruction on how to program the remote to
control your DVD
player).
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
To operate additional audio equipment, point the
remote at the remote sensor of the component you
wish to control and select AMP by pressing the
or
The AMP mode indicator will blink, indicating that
the remote will now control your audio equipment
(see page 35 for instructions on how to program
the remote to control additional Audio/Video
equipment).
NOTE:
or
There are two modes of lighting the Remote Control buttons.
They are the Automatic and Manual modes.
AUTOMATIC MODE (Default mode)
In Automatic mode, if any button is pressed (including the
LIGHT button), the illumination will light for 4 seconds.
MANUAL MODE (Optional mode)
In Manual mode, the illumination will only work when the
LIGHT button is pressed. When the LIGHT button is pressed,
the illumination will light for 8 seconds. During the illumina-
tion, if the LIGHT button is pressed, the illumination will turn
off.
CHANGING LIGHTING MODES (Automatic to
or
button of
Manual/Manual to Automatic)
1.
2.
or
button of the
button of the Source
button of the Source Access on the remote.
When you press any remote control button,
the buttons will light up. The illumination will
light a few seconds during this time. The
buttons will appear to light if the room is
dark.
Place the Remote Control in TV Mode by using the
SOURCE ACCESS
and
buttons. The TV mode
indicator will blink 3 times to confirm the remote control
mode.
Press and hold the LIGHT button for 10 seconds. After
releasing the LIGHT button, the TV mode indicator will
blink 3 times to confirm the mode switch.
A/V NET
/
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

55vg82560vg825

Table of Contents