Installing The Display Assembly - Dell Vostro 3550 Owner's Manual

Installing The Display Assembly

1. Attach the display assembly to the base of the computer.
2. Tighten the screws to secure the display assembly.
3. Connect the touch panel cable (if any) to the system board.
4. Connect the display data cable to the system board.
5. Secure the antenna cables to the routing channels.
6. Connect the antenna cables to the installed wireless solutions.
7. Connect the middle cover.
8. Install the
9. Install the
10. Install the
11. Install the
12. Install the
13. Install the
14. Follow the procedures in
74
Downloaded from LpManual.com Manuals
WLAN card .
palm rest .
keyboard .
WWAN card .
access panel .
battery .
After Working Inside Your Computer .