ZyXEL Communications ONU-631HA Series Quick Start Manual page 3

2 LAN: Use the included Ethernet cable to connect this port to a computer. To connect
more than one computer to the ONU-631HA, connect a switch to the Gigabit Ethernet
port.
3 EMI Suppressor Clip (except Japan): Take the following steps to install the included
Electro-Magnetic Interference (EMI) suppressor clip.
Do not use the ONU-631HA without first attaching the EMI Suppressor Clip
(except Japan).
• Open the suppressor clip. The clip should
be installed on the end of the power cable
that connects to the ONU-631HA, close to
the power jack.
• Lay the included power cable in the clip's
internal cable channel.
• Pass the cable through the clip's cable
channel a second time, making a cable
loop.
• Close the clip.
4 POWER: Use only the included power adaptor to connect this power socket to an
appropriate power source.
ONU-631HA Series Quick Start Guide
1
2
2
3
4