Plug In The Power - First Data VeriFoneVX820 Duet Quick Setup Manual

Plug in the power

Before using the power supply, please connect all peripherals to
the terminal. Failure to do so may result in damage to the unit or
connected devices.
Connect the power cord to the power supply via the three-prong end and
receiver.
Find the power input on the side of the terminal base.
Connect the single-pole AC adapter plug to the power input.
Turn the plug so that cord is directed toward the back of the terminal.
The power supply should be the last item connected to the unit. Plug the
adapter into a surge protector (strongly recommended) or a standard 120V
electrical outlet.
POWER PACK: Input: 100 - 240 V AC, 50/60Hz
OUTPUT: 9 V DC, 4 A
VX820Duet-QSG-2015-08 (English)
Page 7