Radio Antenna Connections - Panasonic SC-PT560 Operating Instructions Manual

Other audio connections
TV or external
equipment terminal
Optical digital audio cable
≥ Do not bend sharply when
connecting.
OPTICAL OUT
3

Radio antenna connections

FM indoor antenna
(included)
Affix this end of the antenna
where reception is best.
Adhesive tape
Main unit
FM ANT
(75 )
Using an outdoor antenna (optional)
Use outdoor antenna if radio reception is poor.
≥ Disconnect the antenna when the unit is not in use.
≥ Do not use the outdoor antenna during an electrical storm.
FM outdoor antenna
[Using a TV antenna (not included)]
≥ The antenna should be installed by a
competent technician.
Main unit
FM ANT
(75 )
75 ≠ coaxial cable
(not included)
Cable required
Main unit terminal
(not included)
[\\\\\\OPTICAL\IN\\\\\\]
[Australia]and]N.Z.]
AM loop antenna
(included)
Stand the antenna up on
its base.
Place the antenna where
reception is best.
This unit can decode the surround signals received
through the set top box, digital broadcasting or satellite
broadcasts. Refer to your equipment's operating
instructions for details. Only Dolby Digital and PCM can
be played with this connection.
≥ After making this connection, make settings to suit the
OPTICAL
IN
type of audio from your digital equipment (➜ 34).
Black
Click!
Red
White
[Australia]and]N.Z.]
AM outdoor antenna
[Using a vinyl wire (not included)]
Run a piece of vinyl wire horizontally
across a window or other convenient
location.
5 to 12 m
Features
2
Main unit
AM ANT
LOOP ANT GND
EXT
LOOP
Push!
Leave the AM loop
antenna connected.
Main unit
AM ANT
LOOP ANT GND
EXT
LOOP
1
3
11