Add Port Forwarding - D-Link DWR-932C User Manual

Section 3 - Configuration
If you selected Add Port Forwarding

Add Port Forwarding

Destination IP Address The IP address you want to allow port forwarding on.
Protocol Select the protocol for ports that you want to allow or
deny access to. Choose between TCP, UDP or Other .
Click the toggle to enter the ports you want port
Port Number
forwarding on.
Enter a single port or a range of ports that you wish
Destination Port Range
to allow port forwarding on. Separate port numbers
with a comma.
Click Apply to proceed.
D-Link DWR-932C User Manual 49