Configuration; Initial Connection To The Router; Connect Via Usb; Usb Tethering Driver Installation - D-Link DWR-932C User Manual

Section 3 - Configuration
This section will show you how to configure your new D-Link mobile router using the configuration utility that can be accessed
via your web-browser.
By default, the DWR-932C comes configured to work with most 4G SIM cards. Simply connect to it via Wi-Fi or use the included USB to access the
SIM's Internet connection. If you wish to configure the router, you will need to establish a direct connection with the router in order to access the
web-based configuration utility. For information about how to Connect via Wi-Fi on page 11. Once you have configured your router, you will
be able to connect using the Wi-Fi settings that you specified in the configuration process. Please ensure that the router is powered on and has
sufficient battery power before commencing the setup process.
To connect to the router via USB, plug the provided Micro-USB cable into the Micro-USB port on the side of the router, and plug the other end into
an available USB port on your computer.
When you plug the DWR-932C into your computer, any necessary drivers will immediately
install. Your version of Windows may prompt you to confirm the driver installation.
D-Link DWR-932C User Manual

Configuration

Initial Connection to the Router

Connect via USB

USB Tethering Driver Installation

10