Firewall Settings - D-Link DWR-932C User Manual

Section 3 - Configuration
A firewall protects your network from the outside world, helping to prevent cyber attacks. This page allows you to alter your
router's firewall settings.

Firewall Settings

Firewall Enable
Clicking this toggle activates the IP Filter. For more
information see IP Filter on page 46
DMZ Settings DMZ is short for Demilitarized Zone. Clicking this
toggle will expose a chosen computer to the outside
world by completely disabling all firewalls.
Note: Only recommend for advanced users, enabling this
option will potentially expose your computer to cyber
attacks over the Internet.
PPTP Pass Through Allows multiple machines on the LAN to connect to
their corporate network using PPTP protocol.
Allows multiple machines on the LAN to connect to
IPsec Pass Through
their corporate network using IPsec protocol.
Allows multiple machines on the LAN to connect to
L2TP Pass Through
their corporate network using L2TP protocol.
The DWR-932C will not respond to pings.
WAN Ping Blocking
Clicking this toggle allows access from WAN.
Access from WAN
Click Apply to save changes.
D-Link DWR-932C User Manual
Firewall Settings
44