Add Port Forwarding - D-Link DWR-932 User Manual

Section 3 - Configuration
If you selected Add New IP Filter:

Add Port Forwarding

Destination IP Address The IP Address you want to allow port forwarding on.
Protocol Select the protocol for ports that you want to allow or
deny access to. Choose between TCP, UDP or Other .
Click the toggle to enter the ports you want port
forwarding on.
Port Number
Enter a single port or a range of ports that you wish
Destination Port Range
to allow port forwarding on. Separate port numbers
with a comma.
Click Apply to proceed.
D-Link DWR-932 User Manual 51