Configuring The Signal Input Channel - HIKVISION DS-7108HGHI-SH User Manual

2.6 Configuring the Signal Input Channel

The DS-7100HGHI-F1, DS-7200HGHI-F1 and DS-7200HGHI-F2 series DVR supports the AHD video input.
You must define each analog channel to TVI or AHD/CVBS signal input before connecting the camera. And the
channel must be connected with the same video input type which you configure on the menu.
Steps:
1. Enter the signal input status interface.
Menu > Camera > Signal Input Status
2. Check the checkbox to select different signal input types: TVI, or AHD/CVBS.
3. Click Apply to save the settings.

Each two video channels are grouped in sequence, e.g., CH01 and CH02, CH03 and CH04..., and the two
channels in the same group must be connected with the same type of video source, i.e., the analog or
HD-TVI or AHD video input.

In the live view interface, when there is no video signal of the analog channel, the corresponding
connectable video signal type message can be displayed on the screen.

The IP camera connection is not supported by DS-7100 series DVR.
Digital Video Recorder User Manual
Figure 2. 28 Configure Signal Input Type
51