Feature Reference
5: Impulse Expander & Resonator Setting
•
This page provide access to a range of parameters which affect operation of
the Impulse Expander and Resonator stages (described later) and how they
interact. It contains a number of parameters which are accessed by moving the
cursor to the appropriate block within the diagram. The corresponding
paramameter will appear in the upper right area of the display.
•
When the cursor is positioned at the "IE on/off" or "RSN on/off"
block, "Para" will appear above the • button. Press this button to go
directly to the main Impulse Expander (≥
Page 126) parameter page, respectively.
IE
≤
off, on.
Turns the Impulse Expander stage off or on. When off (and the Resonator, below, is
on) the display will appear as shown below. Only parameters which appear in the dia-
gram are available for editing.
Edit Mode
Ipulse
Expander
Resonator
On/Off
Input Gain
Dry
Impulse
Level
Expander
Wet Level
123
Resonator
Resonator
Wet Level
On/Off
Resonator
Level
Balance
Impulse
Expander
Level
Balance
Page 125) or Resonator (≥