Panasonic CQ-DX200W Operating Instructions Manual page 57

Notes:
This unit is not operable when receiving a call at power-off
¡
setting.
Pick up the phone.
Pressing [Hang-on] allows users to pick up the phone
during a call incoming.
Note: Pressing any of the preset buttons from [1] to [6]
and [BAND] allows users to pick up the phone, too.
Hang up the phone.
Pressing [Hang-up] allows users to hang up the phone
during a call.
Speaker switchover
The speaker from which the voice of the other side of the
line comes out changes every time [BAND] is pressed.
PRIVATE:
HANDS-FREE TALK: Output from the speaker
Note: This setting is feasible only during a call incoming
or a call.
1
Press [PUSH SEL: SELECT] to display
the AUDIO menu display.
For using the remote control, use [BAND] (SET).
2
Press [PUSH SEL: SELECT] to select a
mode to be adjusted.
For using the remote control, use [BAND] (SET).
3
Turn [VOL] clockwise or counterclock-
wise to adjust.
For using the remote control, use [}] or [{].
Note: If no operation takes place for 10 sec. or more in
the audio menu (2 sec. in Main volume adjustment), the
display returns to the regular mode.
Output from the mobile phone
We do not guarantee all the operations of connectable
¡
devices.
Switch unit
[Hang-on]/Blue LED
[Hang-up]/Red LED
Call with use of the call register
1
Select your target telephone number.
[]]: Newer register
[[]: Older register
2
Press [BAND] to make a call.
Notes:
¡ Up to latest 5 calls can be stored in the register.
¡ If the incoming call number is unknown, "UNKNOWN"
appears.
Pressing [3] (SCROLL) allows users to scroll the
¡
incoming call number during display of the number.
VOLUME
Main volume adjustment
(Setting range: 0 to 40, Default: 15)
q : Up
w : Down
Hands-Free SPEAKER
Speaker selection
LEFT: Sound from left speaker
w q
BOTH: Sound from both speakers (default)
RIGHT: Sound from right speaker
Note: Sound comes only from the front speakers.
Echo canceller
q : EC HIGH (significant echo suppression)
w : EC LOW (echo suppression, default)
CQ-DX200W
Status indicator (Blue LED)
lights: Call waiting/Talking
stays out: Not connected
blinks rapidly: Receiving a call
blinks slowly:
Pairing/Reconnecting
57