Ipod Control - Panasonic CQ-DX200W Operating Instructions Manual

iPod Control

Connection of the optional iPod adapter (Direct cable for iPod) (CA-DC300N) allows users to operate the iPod including file selection
and file sequence change with the buttons on this unit.
1
Connect the iPod.
2
Press [SRC] to select the iPod mode.
Playback starts.
Note: If playback does not start, press [BAND]
(5 y ).
3
Select a desired portion.
File Selection
[7]: Next file
[6]: Beginning of the current file
Note: Hold down for fast forward/reverse.
The type with which playback data is classified is
selectable.
1
Press [}] (LIST) to call up the play
mode selection screen.
2
Turn [VOL] to select the play mode.
PLAYLIST: Playback by playlist
ARTIST:
ALBUM:
For using the remote control, use [}] or [{].
Notes:
¡ When the []] button is pressed, the regular
screen appears.
¡ Displayable length of playlist/artist/album name:
within 8 characters (Otherwise, it cannot be dis-
played completely at the above playing mode.)
3
Press [PUSH SEL] to determine the
selection.
For using the remote control, use [BAND] (SET).
54
CQ-DX200W
For the previous file, press twice.
Playback by artist
Playback by album
Pause
Press [BAND] (5 y ).
Press again to cancel.
4
Turn [VOL] to select the portion to play.
Notes:
¡ For selecting ARTIST, the ALBUM selection
screen appears after selecting an artist name.
¡ When the []] button is pressed, the previous
screen appears.
5
Press [PUSH SEL] to determine the
selection.
For using the remote control, use [BAND] (SET).
Note: Files without an album name or an artist
name are not playable in the playing mode of the
album or artist display respectively.