Handset Or Headset; Connector - Philips SOPHO SuperVisor 25 Engineer's Manual

S bus
0

Connector

FOR SAFETY REASONs:
If the analoque interface is used, a dummy connector
on the S bus connector. If the S bus is used, a dummy plate
0
placed on the Analoque Interface.
Figure 6-2 Items at the Rear Side of Model 25.
S bus
0
Connector
Figure 6-3 Items at the Rear Side of the Model 35.
6.2.

HANDSET OR HEADSET

6.2.1. Connector
The handset (or headset) is connected to the console via a four wire coiled cord which
terminates with a four way male modular plug (RJ10), which can be plugged in at the right as
well as at the left of the console.
48
V.24+Auxillary
Analoque Operator
Interface
Interface (AO)
0
V.24+Auxillary
Interface
AM Key
Switch
Loudspeaker
must be placed
must be
AM Key
Switch
Loudspeaker
Audio IN Audio OUT
Interface Interface
Audio IN Audio OUT
Interface Interface