Startup Procedure And Error Messages; Startup - Philips SOPHO SuperVisor 25 Engineer's Manual

3.

STARTUP PROCEDURE AND ERROR MESSAGES

3.1.

STARTUP

If the ISPBX is projected correctly and the hardware is correctly installed you can start up the
console. The console starts up as soon as it is powered. So, to do a startup, connect the
console to the ISPBX.
Note that the console starts even if the projecting is not correct. In that case the Operator
facilities are not available. The main menu, which is displayed when you press the menu key,
will be available except for the following:
- 'Status' menu;
- In case of model 25:
- Urgent;
- Day/Night;
- AM;
- Cost.
The startup procedure in model 25 and model 35 is depicted in
in Model 25 and Model
displayed on the screen. If no errors are detected the console will become operational.
28
35.". If errors are detected during this procedure, an error message is
Figure 3-1 "Startup Procedure