Philips SOPHO SuperVisor 25 Engineer's Manual page 41

When you have selected '2 - Edit data' of the main menu the following screen is displayed:
Data editing
1 - Edit directory data
2 - Edit status monitoring data
3 - Edit speed dialling key data
4 - Return to main menu
Make your choice: [1]
Give file name: [tele.txt]
Select the type of file you want to edit and enter the file name (or no characters if you want
to select the default file name) and close with <CR>. The tool starts up the editor and you
will be in the editor program. After closing the editor, the tool returns to the Data editing
menu.
In the following section the layout of the data files is explained.
Choice 3 (Store data into SuperVisor)
If you have chosen '3' it means that you want to store data into the Supervisor. The following
menu is displayed:
Store data into SuperVisor
1 - Store directory data
2 - Store status monitoring data
3 - Store speed dialling key data
4 - Return to main menu
Make your choice: [1]
Give file name: [tele.txt]
Programming in progress...
Select which type of data you want to store in the console, and then enter the file name (or
39