Error Messages - Philips SOPHO SuperVisor 25 Engineer's Manual

- Entry number
- Name
- DNR
If name and number field are omitted, the specified speed dialling key will be cleared. If a key
was already programmed, it will be programmed with the new data.
The following gives an example of a speed dialling file:
1;POLICE;00206542918
5;ALARM;00611
10;BOSS;2891
11;HOTEL;0020688888
4.4.4.

Error Messages

The following error messages can be displayed to indicate an error:
- Port could not be opened... .
Action: Check in the SFSV35FM.INI file, which port is assigned for the communication. Is
this port present on the PC or is this port already used by another task (mouse driver?).
- Directory file does not exist.
Action: Check the path and file name.
- Status monitoring file does not exist.
Action: Check the path and file name.
- Speed dial key file does not exist.
Action: Check the path and file name.
- Communication failure.
Action: Check connection between the console and the PC.
- Invalid programming of... .
Action: Check data format in the file. If file format correct, disconnect the interface cable
from the console and connect it again. Now try again.
- Data lost, switch to lower speed ( During data transfer via V.24 interface).
Action: Switch to a lower communication speed.
: 1 ... 12 representing the 12 speed dialling keys
: 6 characters (representing the name)
: 20 digits.
43