Table of Contents
Advertisement
Chapter 4 Parameters|
actual tension output
tension
setting
The reel control is shown as follows.
actual tension output
tension
setting
08-83
Friction Compensation
Control
TQCPG
mode
Settings
It is used for the compensation of dynamic friction and 100% corresponds to the motor rated
torque.
The compensation coefficient of the friction torque can be got from the inertia estimation in the
speed mode. Users can adjust by the requirement.
08-84
Compensation Coefficient of Material Inertial
Control
TQCPG
mode
Settings
Compensation coefficient of material inertia=material density*material width. Unit for density is
3
kg/m
and for width is m. The material inertia of the reel will be changed by the reel.
4-156
CALL NOW 800-985-6929
empty r eel
max. r eel
0.0~100.0%
0~30000
CALL NOW 800-985-6929
http://www.automatedpt.com
tension
taper =0
tension taper
C
A>B >C
B
A
cur rent reel
tension
taper =0
tension taper
C
A>B >C
B
A
cur rent reel
Factory Setting: 0.0
Revision Dec. 2008, 04VE, SW V2.05
http://www.automatedpt.com
Unit: 1
Unit: 1
Factory Setting: 0
Advertisement
Table of Contents
