Gravely Compact Pro 34 Operator's Manual page 26

MOWER DECKS
(Figure 18)
Removing the Mower Deck
1. Remove PTO belt (See Remove PTO
Belt on page 25).
WARNING: AVOID INJURY. Mower
lift arms and mower lift pedal could
cause severe injury if they are not
locked before removing the mower
deck. ALWAYS lock mower deck lift
before removing the deck.
2. Lock the mower deck in the service
position.
Push the mower lift pedal forward
between cutting height number 4 and
number 5 to align the holes in the deck
lift shaft and the deck lift cover. Insert the
cutting height pin in the holes on the side
of the deck lift cover so it passes all the
way through the deck lift cover and
shaft.
IMPORTANT: The mower lift arms are not
locked unless the cutting height adjustment
pin passes all the way through both the deck
lift cover and shaft.
NOTE: Support the mower deck on blocks or
jack stands before disconnecting link chains
from mower lift arms to prevent the deck from
falling.
3. Remove link chains from mower lift
arms. Note hole location on mower lift
arms for replacement.
4. Remove the mower mounting pins
connecting the mower mounting arms to
the deck.
5. Slide mower deck out from under unit.
3
1. Mower Lift
Arm
2. Link Chain
3. Mower
Mounting
Arm
Installing the Mower Deck
(Figure 18)
1. Slide mower deck under unit.
2. Connect mower mounting arms to deck
with mower mounting pins.
3. Install link chains on the mower lift arms
in the same holes they were removed
from.
4. Install PTO mower belt (See Remove
PTO Belt on page 25.
5. Level mower deck (See Leveling the
Mower Deck on page 27).
GB - 26
1
5
1
2
2
4
4. Mower
Mounting Pin
5. Mower Lift
Arms Locked
Figure 18
3
OF3765