Table of Contents
Advertisement
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Restrictions when using
This function is available for all hotplates, provided that the
other zone of the same group is not operating (see image).
Otherwise, in the visual display of the selected hotplate
will flash; then the power level will automatically set
Š
itself to
Š
.
*URXS
*URXS
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Turn off a hotplate automatically
Enter the cooking time for the desired hotplate. The hotplate
turns off automatically once the time has elapsed.
Programming
Select the desired power level.
1.
Press the
0
symbol. The
2.
up.
lights up in the time program function display. To
‹‹
select another hotplate, press the
until the
x
indicator for the desired hotplate lights up.
Select the required cooking time in the programming panel.
3.
The possible previous setting is, from left to right 1, 2, 3, etc.,
up to 10 minutes. Within the next 10 seconds, continue past
the options in the programming panel until reaching the
desired time.
After a few seconds the cooking time begins to count down.
.
Š
*URXS
*URXS
x
indicator of the hotplate lights
symbol several times
0
To activate
Select the power level
1.
Press the programming panel located above the
2.
The function has been activated.
To turn off
and
›
Press the programming panel located above the
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming panel, the cooking time is reduced by one
minute, if it is held down the time is automatically reduced to
one minute.
If the previous setting from 6 to 10 is pressed in the
programming panel , the cooking time is increased by one
minute, if it is held down the time is automatically increased to
99 minutes.
Once the time has elapsed
The hotplate switches off. An audible signal sounds and
appears in the time program function display for 10 seconds.
The
indicator lights up. Pressing the
x
indicators and stops the signal.
Changing or cancelling the time
Press the
0
symbol several times until the desired
lights up. Change the cooking time in the programming panel,
or set to
.
‹‹
Automatically switch off a hotplate with the cooking sensor
function activated
When cooking using the sensor system, the programmed
cooking time begins to count down once the hotplate reaches
the desired temperature.
Automatically switch off a hotplate with the deep-frying
function
When cooking using the deep-frying function, the programmed
cooking time begins to count down once the selected hotplate
reaches the desired temperature.
Notes
If a cooking time has been programmed in several zones, it
■
can be set to display all time values. To do this, press the
symbol several times until the
hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
■
.
Š
@›
symbol turns off the
0
indicator for the required
x
symbol.
@›
symbol.
‹‹
x
indicator
0
15
Advertisement
Table of Contents
