Frying Programs; Childproof Lock; Activating And Deactivating The Childproof Lock; The Powerboost Function - Siemens EH8 SE2 Series Instruction Manual

Frying programs

These programmes should only be used with pans
recommended for the frying function.
The following food can be prepared using these programmes:
Programme Dish
Escalope
˜‚
Breast meat (poultry), cordon bleu
˜ƒ
Rare steak
˜„
Medium or well-cooked steak
˜...
Fish
˜†
Pan-fried frozen vegetables and other
˜‡
ingredients
Oven-style - potato chips (frozen)
˜ˆ
Pancakes
˜‰
Omelette, eggs
˜Š

Childproof lock

The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To activate: press and hold the
seconds. The symbol lights up for 10 seconds. The range
@
is locked.

The Powerboost Function

The Powerboost function can be used to heat food more
quickly than using the power level

Restrictions when using

This function is available for all hotplates, provided that the
other zone of the same group is not operating (see image).
Otherwise, in the visual display of the selected hotplate
will flash; then the power level will automatically set itself
Š
to .
Š
*URXS 
 
 
*URXS 
# symbol for approx. 4
.
Š
›
*URXS 
 

 
*URXS 
Select the desired program
Select the hotplate:
Press the ˜ symbol.
1.
Slide your finger along the programming panel until the
2.
required programme is displayed.
The program is now selected.
The temperature symbol stays lit until the set temperature is
reached. Once reached, the signal sounds and the temperature
symbol light goes out.
Add oil or butter to the pan and then the food. As usual, turn
the food in order to prevent it from burning.
Switching off the program
Select the hotplate and press the
pan.
To deactivate: press and hold the
seconds. The lock is now deactivated.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the "Basic Settings" section.

To activate

Select the power level
1.
Press the programming panel located above the
2.
The function has been activated.

To turn off

and
Press the programming panel located above the
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
˜‹ lights up in the hotplate display.
symbol. Then remove the
˜
# symbol for approx. 4
.
Š
@› symbol.
symbol.
@›
11