Powerboost Function; Activation; Deactivation; Childproof Lock - Siemens EH631BEB1E Instruction Manual

Table of Contents

Advertisement

PowerBoost function

en
vPowerBoost function
T he PowerBoost function enables you to heat up large
P o w e r B o o s t f u n c t i o n
quantities of water faster than when using heat setting
.
Š
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise,
the display for the selected hotplate; the
will then be set automatically without activating the
function.

Activation

Select a hotplate.
1.
Touch the
symbol.
&
2.
lights up on the display.
The function is activated.

Deactivation

Select the hotplate.
1.
Touch the
symbol.
&
2.
The
display goes out and the hotplate switches
back to the
heat setting.
Š
The function is deactivated.
In certain circumstances, the PowerBoost
Note:
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
14
and
will flash in
Š
heat setting
Š
AChildproof lock
Y ou can use the childproof lock to prevent children
C h i l d p r o o f l o c k
from switching on the hob.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol
seconds. The indicator next to the symbol
for 10 seconds. The hob is locked.
To deactivate: press the symbol
4 seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the ~ "Basic settings" section
bAutomatic safety cut-out
I f a hotplate operates for an extended period and no
A u t o m a t i c s a f e t y c u t - o u t
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
indicator
œ
or
flash alternately in the hotplate display.
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours).
for approximately 4
lights up
for approximately
,
and the residual heat
"

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eh be series

Table of Contents