AP: 51 37 55 02
2
A-pillar trim - Renewal
2.1
Procedure
2.1.1
Cutting locations
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Separating cut 30 mm beneath original welded seam.
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Door frame, punch rivets.
– A-pillar, welded seams.
– Detach part.
Note:
A-pillar trim is foam-filled.
– Remove remaining material at roof, grind down original wel‐
ded seam if applicable.
Caution:
Take care not to damage shoulder at roof. New part is riveted
to original flange.
2.1.2
Replacement parts
A-pillar trim
Solid rivets
Pop rivets
Body - adhesive
Audi A8 1994 ➤
Body repairs - Edition 10.1998
2. A-pillar trim - Renewal
45