Registration (Pairing) - Motorola MBP41 User Manual

2.4

Registration (Pairing)

The Baby monitor camera is pre-registered to your Parent Unit. You do
not need to register it again unless the Baby Unit
Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedure below:
1. Press the
2. Press the
and the
3. Press the
the OK button to confirm.
CAM 1 CAM 2
4. /
DOWN button to select the desired CAM and press the OK button to
start searching for a camera unit. The green audio level LED blinks
while searching.
5. Press the OK button to confirm.
6. Press and hold the PAIR button under the bottom of the camera unit until
the parent unit finds the camera, beeps and the video from the camera
appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
If no camera unit is found within about 0 seconds, the search will end and
the parent unit will return to its previous mode.
Getting Started
M
button of the parent unit and the menu bar will pop up.
<
LEFT button or
del/add/view/scan
menu will pop up.
+
UP button or
CAM 3 CAM 4
/ /
>
RIGHT button until
-
DOWN button to select
will pop up, press the
loses its link with the
C
is highlighted,
ADD
, and press
+
UP button or
-
1