Setup Wizard - Edimax BR-6478 AC V2 User Manual

III-3-2. Setup Wizard
help you switch the device to a different operating mode. Select "Setup
Wizard" or "Switch to Router/Access Point/Range Extender/Wireless
Bridge/WISP mode" and then click "Run Wizard" to begin.

Setup Wizard

Switch to Router/Access
Point/ Range Extender/
Wireless Bridge/ WISP
mode
Switch to Router/Access Point/ Range Extender/ Wireless Bridge/ WISP
mode:
1.
Follow the on-screen instructions to back up your current settings and
then reset the device back to its factory default settings.
2.
After the device has reset you will see the screen below. Close your
browser and open it again.
You can run the setup wizard again to reconfigure the
basic settings of the device, or you can run a wizard to
This wizard will help you to set up the basic
functions and settings of the device. For
guidance about using the setup wizard, please
refer to II.
This wizard will help you to switch the device
to a different operating mode: Wi-Fi router
mode, access point mode, range extender,
wireless bridge, or WISP mode (see below).
Installation.
46