Iii-3-2. Setup Wizard - Edimax BR‐6478AC User Manual

III‐3‐2. Setup Wizard
help you switch the device to a different operating mode. Select "Setup
Wizard" or "Switch to Router/AP/Range Extender" and then click "Run
Wizard" to begin.
Setup Wizard
Switch to
Router/AP/ Range
Extender
Switch to Router/AP/Range Extender:
1.
Follow the on‐screen instructions to back up your current settings and
then reset the device back to its factory default settings.
2.
After the device has reset you will see the screen below. Reconnect to the
device's default SSID "edimax.setup" and go to the URL
"http://Edimax.Setup" in a web browser.
You can run the setup wizard again to reconfigure the
basic settings of the device, or you can run a wizard to
This wizard will help you to set up the basic
functions and settings of the device. For
guidance about using the setup wizard, please
refer to II. Installation.
This wizard will help you to switch the device
to a different operating mode: Wi‐Fi router
mode, access point mode or range extender
mode (see below).
28