Jackson 24P-NSU Service Manual page 9

INSTALLATION OF WASH SPRAY HEAD AND RINSE SPRAY ASSEMBLIES
Installation of Wash Head and Rinse Arm Assemblies: (Items disassembled for shipment)
1. Line up stud to match with slot in nipple.
2. Insert rinse arm assembly into female receptacle protruding through back of
machine.
3. Insert lanyard pin to secure rinse arm assembly properly.
4. Make certain end plugs are secured properly in rinse tubes.
1. Line holes up on wash head assembly to match slots in pump housing.
2. Insert wash head assembly down into upper pump housing as far as possible.
3. Insert retaining pin to secure wash head to pump housing.
[ PAGE 5 ]
RINSE ARM ASSEMBLY