HELP04
1.
Attach the main pcb assy, and fix it with two screws.
2.
Connect the flexible board to the connector on the main pcb assy.
Flexible Board
HELP05
Grease (G-35): J-6082-621-A
Grease (G-85): J-6082-626-A
1.
Apply grease (G-85) to the two instruction portions of the coupler.
2.
Apply grease (G-35) to both sides of the coupler receive.
3.
Pass the coupler to the coupler receive, and fit the shaft of the coupler to the notch of the back adjustment washer(s).
Note:
Be sure to use the gold color one for the back adjustment washer that comes in contact with the coupler.
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
Connector
Main Pcb Assy
Back Adjustment Washer
Apply grease (G-35) (Both sides)
Coupler Receive
HELP