Operating Pronto With Rf - Philips Pronto User Manual

Using the Power Features

Operating Pronto with RF

By default, Pronto uses infrared (IR) signals to operate devices. IR signals have an
operating distance of approximately 33 ft (10 m).
However, you can choose to have Pronto working with radio frequency (RF) signals
to operate devices from a distance or from an adjacent room. An RF Extender (not
included) is therefore required.
The RFX6000 is an RF Extender that can be used in combination with Pronto.
The RF Extender receives RF signals from Pronto and converts them into IR signals,
sent out to the device. Therefore, the RF Extender has to be placed near the device
you are operating with the RF Extender's sending eye pointed towards the device.
Pronto
User Guide
IR signals
RF signals
RF Extender
34
IR signals